---
title: "Spirometer sensor"
url: "https://cma-science.com/product/spirometer-sensor/"
type: "product"
published: "2025-05-14T13:52:40+01:00"
modified: "2026-08-19T16:45:51+01:00"
author: "Tom van Raaij"
---

The spirometer sensor consists of a flow tube through which the air is inhaled and exhaled.
 To lessen the possibility of cross contamination between subjects the Spirometer is delivered with a disposable bacterial filter and 10 disposable mouthpieces. Replacement of a bacterial filter (CMA art. nr BT82fil) and mouthpieces (CMA art. nr BT82mp) can be ordered separately from CMA.

**Technical specifications**:

- Measurement range: -5 to +5 L/s
- Resolution: 0.01 L/s
- Maximum measurement frequency: 100 kHz (CoachLab II+, WiLab) / 1 MHz (VinciLab 2)
- Warranty: 3 years

All technical specifications of the spirometer sensor are described in the product manual, see downloads.

**The spirometer can be used to perform a variety of experiments**:

- Recording breathing patterns before, during and after exercise
- Measuring important lung capacities like:
    - Forced Expiratory Volume (FEV) – the volume of air exhaled after a short period of constant effort. When this test is done over a one-second interval, it is known as FEV1
    - Forced Vital Capacity (FVC) – the volume of air exhaled by a forced maximal exhalation after a full inhalation
    - Tidal Volume (TV) – the volume of air, inhaled and exhaled at rest

The Spirometer can be directly connected to the analog BT inputs of the CMA interfaces.
 **Attention:** The sensor cable BT – IEEE1394 needed to connect the sensor to an interface is **not** supplied with the sensor and has to be purchased separately (CMA Art. Nr BTsc_1 or BTsc_1Short).
